Readdy Write  
0,00 €
Your View Money
Views: Count
Self 20% 0
Your Content 60% 0

Users by Links 0
u1*(Content+Views) 10% 0
Follow-Follower 0
s2*(Income) 5% 0

Count
Followers 0
Login Register as User
3D ; 3D Drucken ; Qidi ; X-Max ; ABS ;

Error: Extruder sensor error or power is not enough - by flat cable at the edge to the connector

27.05.2021 (👁6689)

Error: Extruder sensor error or power is not enough

 

Printer: QIDI X-MAX

Solution:

The flat cable has a problem, when you wiggle it. The temperature at preheating->extruder jumps up to 1000 degrees.

 

Hello Linda

 

The problem comes up again even with the other extruder.

The problem is at the edge of the flat cable.

So when the head moves, the cable makes problem either with the connector or with the wires inside

 

regards

 

Raimund Popp

Ruemelinstr. 25

72622 Nuertingen

Email: Raimund.Popp@CodeDocu.de

Web: https://CodeDocu.de

Tel: +49 7022 9319004

Error Message on Qidi X-Max Printer

 

 

 

Replace the extruder with the high-temperature extruder